Mar 132014
 

Download User Guide

Product specification

Name:WiFi Slave Controller(constant voltage Slave)

Model:BY-CON-WIFIS

Product Summarize

1. Product constitute

1.WiFi-LED Controller(slave)

It is the core of product, responsible for receive control signal and control LED equipment.

2.A manual

Product use methods detailed instructions

2. Product summarize

LED-WiFi controller is following the traditional with infrared, RF technology controller foundation, it is birth of market and customer’s demand, it is one type controller which integration the newest wifi technical in the market. It makes the LED control more convenience, more hommization. We can use an Android system or IOS system mobile phone to install control software, then it can control LED, this is the wishes of every customer.

Use WiFi technology can make our control range more wider, can get rid of narrow space constraint, in building can control more than 50m, in outdoor can control more than 100m.

WF201 is a node controller of multipoint control system, it is received the signal from master, carry out synchronization control, the single point control.

3. Controller technical parameters

l Working voltage: DC5–24V

l Working temperature:-20-60℃

l Power consumption:<1W(12V)

l Output::3 channel(common anode),4A/CH

l Packing dimension:L215*W165*H55(mm)

l External dimension:L107*W65*H30(mm)

l Net weight:260g

l Gross weight:300g

Controller Use Instruction

1. Working state instruction

Indicator light

Function table

Power

Power indicator light, long-time bright shows power supply normally

Signal

Flashing When a master and slave communication

2. Connector instruction

WF201-WiFi-Slave-Controller-for-LED-Light

WF201-WiFi-Slave-Controller-for-LED-Light

1. Slave controller ID

Slave controller ID setting, total 16 ID from 0 to F, The master controller can control alone to each ID or the whole control to all ID . The ID must be unique if need to carry out control alone,or will be simultaneous control with the same ID.

2. Signal input

Receive the wired control signal from the master controller ,when cable access, wireless control is invalid.

WF201-WiFi-Slave-Controller-for-LED-Light

Definition:

Number

Function

1

A(Data+)

2

B(Data-)

3

-

4

-

5

-

6

-

7

GND

8

GND

3. Signal onput

Amplify and transmit the master control signal to slave controller.

WF201-WiFi-Slave-Controller-for-LED-Light

Definition:

Number

Function

1

A(Data+)

2

B(Data-)

3

-

4

-

5

-

6

-

7

GND

8

GND

1. Slave controller receive frequency setting

Slave controller receive frequency setting, this frequency must be the same as the master setting, or else can not receive wireless control signal.This dial-up is invalid when connect the wire signal.

2. Input and output

The input voltage depend on the load voltage,but must be within DC5-24V, overhigh voltage would be burn out controller.The output way depend on lamps type.The controller is apply to RGB Lamps,color temperature lamps and single lamps, detailed description please refer to the typical application circuit.

3. Antenna

Master wireless signal receiving antenna.

Built-in mode form of controller

1.The mode form of RGB Control:

Mode number

function

remark

1

Static red

Brightness is adjustable,Speed is unadjustable

2

Static green

3

Static blue

4

Static yellow

5

Static purple

6

Static cyan

7

Static white

8

Three-color jumpy changing

Speed and brightness are adjustable

9

Seven-color jumpy changing

Speed and brightness are adjustable

10

Three-color gradualchanging

Speed and brightness are adjustable

11

Seven-color gradual changing

Speed and brightness are adjustable

2. The mode form of color temperature control:

Mode number

function

remark

1

CW

Brightness adjustable

2

80%CW

3

60%CW

4

40%CW

5

20%CW

6

PW(pure white)

7

20%WW

8

40%WW

9

60%WW

10

80%WW

11

WW

3. The mode form of dimming Control:

Mode number

function

remark

1

1%

Brightness proportion

2

10%

3

20%

4

30%

5

40%

6

50%

7

60%

8

70%

9

80%

10

90%

11

100%

Explain installed hardware

1. Install ANT

WF201-WiFi-Slave-Controller-for-LED-Light

ANT’s installation drawingclockwise install WIFI antenna and anticlockwise take down the antenna.

2. Install power supply and LED equipment

This connector structure belong to drawer structure, the device interface of power supply and LED is together, four interface one the left side (3、2、1、V+)is connect led equipment,the fifth interface is connect the anode V+ of power supply, the sixth interface is connect the cathode V_ of power supply. According to the rated voltage of led lamp, we supply power to controller ,and the rated voltage of controller is 24V. As follows:

WF201-WiFi-Slave-Controller-for-LED-Light

3. Connect RGB lamp instruction

WF201-WiFi-Slave-Controller-for-LED-Light

When connect three channels LED, you should put the Magic Color 1.0 software switch to CD mode to use,only under this mode,you can control the LED’s color,brightness and speed.Color disk adjust the color(Adjust process can be seen in the upper left corner R, G, B numerical with change),speed/brightness item adjust speed and bright(“M”set the LED dynamic effect,”M”adjust the LED dynamic change.

4. Connect color temperature lamps instruction

WF201-WiFi-Slave-Controller-for-LED-Light

When connect three channels LED, you should put the Magic Color 1.0 software switch to CD mode to use,only under this mode,you can control the LED’s color temperature,brightness and color temperature shortcut key settings.Color disk adjust the color temperature(meanwhile top left CW,WW numerical with change),brightness item adjust bright,”M”key set the special color temperature state.

5. Connect single color lamps instruction

WF201-WiFi-Slave-Controller-for-LED-Light

When connect one channel LED, you should put the Magic Color 1.0 software switch to DIM mode to use,under this mode,use color disk control the LED’s brightness,Adjust process can be seen in the upper left corner NM numerical with change.

System application figure

WF201-WiFi-Slave-Controller-for-LED-Light

Notice: when use the wireless control, in order to achieve the best effect, the master should be placed in each slave control center position.

Packing List

  • 1x WiFi Slave Controller (This Slave Controller must work together with our Master controller)
$34.99

Buy at KiwiLighting.com: WiFi Slave Controller 3-channel 4A/Ch DC-5V~24V

 Posted by at 8:25 am

 Leave a Reply

(required)

(required)

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>