This Touchable RF LED Controller for Color Temperature Adjustable & Dimmable LED Strip Light is a multi-function Touching LED Controller. It adopts the most advanced PWM reomte control technology ,can control all the full color LED lighting with Three lines two circuits(common anode),with 20 grades of brightness and 11 grades of color temperature adjusting.it widely applies to LED strip light and dimmable and color temperature adjustable LED lighting,etc.
- Working voltage:DC12V/24V
- Output control: 3 circuits(R/G/B)
- Control current：6A/circuit
- Connecting mathod: common anode
- Wireless frequency：433.92MHz
- Receiving range:20meters
- Remote Battery: AAA battery * 3pcs
- Remote Cover Material:ABS
- Gross W:156g
Functions of Keys
- 1. Key 1: on
- 2. Key 2: off
- 3. Key 3:highest brightness
- 4. Key 4: medium brightness
- 5. Key 5: lowest brightness
- 1. Adjust brightness for RGB common anode led strip light;
- 2. Adjust color temperature of dual white and warm white led strip light.
How to use
- 1.Brightness Adjusting :Use your finger to touch the left half part of color ring ,you can change the brightness from the highest to the lowest(100%-1%,20 grades of Brightness to adjust) .
- 2.Color temperature Adjusting: Use your finger to touch the right half part of color ring,you can adjust the temperature from warm white to cool white(11grades to adjust).
- 3.Resume fuction: The previous settings will be resumed while power on again.
- 4.Matching code: Press Key 3 once within 3 seconds when power on again,the light will blink 3 times if matching is successful.
- 5.Clearing Code: Press Key 3 five times within 3 seconds when power on again,the light will blink 6 times if clearing is successful.
Please don’t touch or press the color ring while loading the battaries to protect the sensitiveness. Please use the remote controller 3 seconds after the battaries are loaded.Please reload the battaries when you find the color ring is not sensitive.
Please follow the instructions to use safely. Attention! Operate Carefully! Please read the following tips carefully.
- 1、 Donot install the product in areas with thundering,strong magnetic and high pressures.
- 2、 Make sure the connection is right and firmed in case of fire accident caused by short circuit.
- 3、Please install the controller with ventilation to make sure the temperature is appropriate.
- 4、Please check whether the input voltage,power supply(constant pressure) acord with the requirements. “
- 5、Please donnot connect the power before connection.
- 6、Please contact the supplier when problems occur.Don’t maintain by yourself.
- 7、The Instruction is for this Item Only,no notification if any amendments.
we claim to offer free maintenance or change new product if any problems occur within one year. The buyer should pay for the maintenance due to unfollowing the instructions even within one year. The maximum duty of our company is to change the product with the same item No. and quantity if any damage occur.
- 1. Incorrect operation mainly due to unfollowing instructions.
- 2.Damage caused by uploading, fixing,changing circuit ,connecting or changing the chips unprofessionally. “
- 3.Damage caused by shipping,shaking,dropping or water inflowing after buying.
- 4. Damage caused by natural disasters suchas,earthquake,fire,flood,thundering,environmental pollution or abnormal voltage.
- 5.Damage caused by high temperature,moisture,hazardous chemicals or inappropriate maintenance.
- 6.Our products have been updated newly.
- 1x Wireless Controller
- 1x Touchable Remote
Buy at KiwiLighting.com: Touchable RF LED Controller for Color Temperature Adjustable & Dimmable LED Strip Lights